PDA

View Full Version : Will 98 900rr internals...



JHooD231
May 26th, 2005, 10:17 PM
like the crank and rods fit into a 95 900rr motor? I was wondering because the 98 motor is 919 and the 95 motor is 893...Also, will the oil pan line up?

Sime
June 4th, 2005, 10:00 PM
Don't know about the other parts, but I do believe the oil pan will fit. On the Ron Ayers.com microfiche, it shows the same oil pan gasket from 93-99. That to me would imply that the oil pan will bolt up (could also be the same part too).

TURBORR
June 7th, 2005, 03:52 PM
Yes the crank will fit. But, the crank from the 93-95 is different. If you are going to use the crank out of the 96-99 engine, you will have to use a 96-99 clutch basket and clutch cover. The gears that drive the clutch basket are reversed on both of the clutches.

DOC