Page 3 of 3 FirstFirst 123
Results 41 to 42 of 42

Thread: removing the 180kmph restrictor on jap imports

  1. #41
    Not been here that long Peter Webster's Avatar
    Join Date
    May 2017
    Location
    Gold Coast, Australia
    Posts
    1

    Bikes:
    CBR400 NC29

    Default Re: removing the 180kmph restrictor on jap imports

    Quote Originally Posted by gothy View Post
    CDI end resistor mod. PIC 1

    at the CDI or ECU , you need too source two wires. First the BROWN/BLUE STRIPED wire cut it.
    Then a BLACK/WHITE wire you need too remove a small amount of the plastic insulation.
    Then solder the 2k ohm resistor, from the bared BLACK/WHITE wire too the BROWN/BLUE STRIPED wire at the CDI END. then away you go

    (this mod wont blow the fuse as its on the other side of the wiring)
    After doing the mod this way my temperature gauge and fan stopped working. How did I manage that?

  2. #42
    Not been here that long
    Join Date
    Oct 2017
    Location
    Mallaysia
    Posts
    2

    Default Re: removing the 180kmph restrictor on jap imports

    How to do it

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

You can help to support this site by making a donation below
(even a small donation makes a big difference)
 
Make payments with PayPal - it's fast, free and secure!